Comprar Monedas

/**

WPSmartContracts.com

Blockchain Made Easy

http://wpsmartcontracts.com/

*/

pragma solidity ^0.5.7;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert on error
 */
library SafeMath {
    
    int256 constant private INT256_MIN = -2**255;

    /**
    * @dev Multiplies two unsigned integers, reverts on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
    * @dev Multiplies two signed integers, reverts on overflow.
    */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        require(!(a == -1 && b == INT256_MIN)); // This is the only case of overflow not detected by the check below

        int256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
    * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
    * @dev Integer division of two signed integers truncating the quotient, reverts on division by zero.
    */
    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0); // Solidity only automatically asserts when dividing by 0
        require(!(b == -1 && a == INT256_MIN)); // This is the only case of overflow

        int256 c = a / b;

        return c;
    }

    /**
    * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
    * @dev Subtracts two signed integers, reverts on overflow.
    */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a));

        return c;
    }

    /**
    * @dev Adds two unsigned integers, reverts on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
    * @dev Adds two signed integers, reverts on overflow.
    */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a));

        return c;
    }

    /**
    * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}


/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract ERC20Pistachio is IERC20 {

    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Public parameters to define the token
    */

    // Token symbol (short)
    string public symbol;

    // Token name (Long)
    string public  name;

    // Decimals (18 maximum)
    uint8 public decimals;

    /**
    * @dev Public functions to make the contract accesible
    */
    constructor (address initialAccount, string memory _tokenSymbol, string memory _tokenName, uint256 initialBalance) public {

        // Initialize Contract Parameters
        symbol = _tokenSymbol;
        name = _tokenName;
        decimals = 18;  // default decimals is going to be 18 always

        _mint(initialAccount, initialBalance);

    }

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }

}

/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract ERC20Burnable is ERC20Pistachio {

    bool private _burnableActive;

    /**
     * @dev Burns a specific amount of tokens.
     * @param value The amount of token to be burned.
     */
    function burn(uint256 value) public whenBurnableActive {
        _burn(msg.sender, value);
    }

    /**
     * @dev Burns a specific amount of tokens from the target address and decrements allowance
     * @param from address The address which you want to send tokens from
     * @param value uint256 The amount of token to be burned
     */
    function burnFrom(address from, uint256 value) public whenBurnableActive {
        _burnFrom(from, value);
    }

    /**
     * @dev Options to activate or deactivate Burn ability
     */

    function _setBurnableActive(bool _active) internal {
        _burnableActive = _active;
    }

    modifier whenBurnableActive() {
        require(_burnableActive);
        _;
    }

}

/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0));
        require(!has(role, account));

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0));
        require(has(role, account));

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0));
        return role.bearer[account];
    }
}

contract MinterRole {
    using Roles for Roles.Role;

    event MinterAdded(address indexed account);
    event MinterRemoved(address indexed account);

    Roles.Role private _minters;

    constructor () internal {
        _addMinter(msg.sender);
    }

    modifier onlyMinter() {
        require(isMinter(msg.sender));
        _;
    }

    function isMinter(address account) public view returns (bool) {
        return _minters.has(account);
    }

    function addMinter(address account) public onlyMinter {
        _addMinter(account);
    }

    function renounceMinter() public {
        _removeMinter(msg.sender);
    }

    function _addMinter(address account) internal {
        _minters.add(account);
        emit MinterAdded(account);
    }

    function _removeMinter(address account) internal {
        _minters.remove(account);
        emit MinterRemoved(account);
    }
}

/**
 * @title ERC20Mintable
 * @dev ERC20 minting logic
 */
contract ERC20Mintable is ERC20Pistachio, MinterRole {

    bool private _mintableActive;
    /**
     * @dev Function to mint tokens
     * @param to The address that will receive the minted tokens.
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 value) public onlyMinter whenMintableActive returns (bool) {
        _mint(to, value);
        return true;
    }

    /**
     * @dev Options to activate or deactivate Burn ability
     */

    function _setMintableActive(bool _active) internal {
        _mintableActive = _active;
    }

    modifier whenMintableActive() {
        require(_mintableActive);
        _;
    }

}

contract PauserRole {
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender));
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }

    function renouncePauser() public {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is PauserRole {
    event Paused(address account);
    event Unpaused(address account);

    bool private _pausableActive;
    bool private _paused;

    constructor () internal {
        _paused = false;
    }

    /**
     * @return true if the contract is paused, false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused);
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused);
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyPauser whenNotPaused whenPausableActive {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyPauser whenPaused whenPausableActive {
        _paused = false;
        emit Unpaused(msg.sender);
    }

    /**
     * @dev Options to activate or deactivate Pausable ability
     */

    function _setPausableActive(bool _active) internal {
        _pausableActive = _active;
    }

    modifier whenPausableActive() {
        require(_pausableActive);
        _;
    }

}

/**
 * @title Advanced ERC20 token
 *
 * @dev Implementation of the basic standard token plus mint and burn public functions.
 *
 * Version 2. This version delegates the minter and pauser renounce to parent-factory contract
 * that allows ICOs to be minter for token selling
 *
 */
contract ERC20Chocolate is ERC20Pistachio, ERC20Burnable, ERC20Mintable, Pausable {

    // maximum capital, if defined > 0
    uint256 private _cap;

    constructor (
        address initialAccount, string memory _tokenSymbol, string memory _tokenName, uint256 initialBalance, uint256 cap,
        bool _burnableOption, bool _mintableOption, bool _pausableOption
    ) public
        ERC20Pistachio(initialAccount, _tokenSymbol, _tokenName, initialBalance) {

        // we must add customer account as the first minter
        addMinter(initialAccount);

        // add customer as pauser
        addPauser(initialAccount);

        if (cap > 0) {
            _cap = cap; // maximum capitalization limited
        } else {
            _cap = 0; // unlimited capitalization
        }

        // activate or deactivate options
        _setBurnableActive(_burnableOption);
        _setMintableActive(_mintableOption);
        _setPausableActive(_pausableOption);

    }

    /**
     * @return the cap for the token minting.
     */
    function cap() public view returns (uint256) {
        return _cap;
    }

    /**
     * limit the mint to a maximum cap only if cap is defined
     */
    function _mint(address account, uint256 value) internal {
        if (_cap > 0) {
            require(totalSupply().add(value) <= _cap);
        }
        super._mint(account, value);
    }

    /**
     * Pausable options
     */
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from,address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }

    function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
        return super.approve(spender, value);
    }

    function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
        return super.increaseAllowance(spender, addedValue);
    }

    function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
        return super.decreaseAllowance(spender, subtractedValue);
    }

}

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be aplied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 */
contract ReentrancyGuard {
    // counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () internal {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "SafeERC20: low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * This test is non-exhaustive, and there may be false-negatives: during the
     * execution of a contract's constructor, its address will be reported as
     * not containing a contract.
     *
     * IMPORTANT: It is unsafe to assume that an address for which this
     * function returns false is an externally-owned account (EOA) and not a
     * contract.
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != 0x0 && codehash != accountHash);
    }

    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     */
    function toPayable(address account) internal pure returns (address payable) {
        return address(uint160(account));
    }
}

/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for ERC20Chocolate;

    // The token being sold
    ERC20Chocolate private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, ERC20Chocolate token) public {
        require(rate > 0, "Crowdsale: rate is 0");
        require(wallet != address(0), "Crowdsale: wallet is the zero address");
        require(address(token) != address(0), "Crowdsale: token is the zero address");

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(msg.sender);
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds();
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address");
        require(weiAmount != 0, "Crowdsale: weiAmount is 0");
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }

    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds() internal {
        _wallet.transfer(msg.value);
    }
}

/**
 * @title MintedCrowdsale
 * @dev Extension of Crowdsale contract whose tokens are minted in each purchase.
 * Token ownership should be transferred to MintedCrowdsale for minting.
 */
contract MintedCrowdsale is Crowdsale {
    /**
     * @dev Overrides delivery by minting tokens upon purchase.
     * @param beneficiary Token purchaser
     * @param tokenAmount Number of tokens to be minted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        // Potentially dangerous assumption about the type of the token.
        require(
            ERC20Mintable(address(token())).mint(beneficiary, tokenAmount),
                "MintedCrowdsale: minting failed"
        );
    }
}

/**
 * @title PausableCrowdsale
 * @dev Extension of Crowdsale contract where purchases can be paused and unpaused by the pauser role.
 */
contract PausableCrowdsale is Crowdsale, Pausable {
    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use super to concatenate validations.
     * Adds the validation that the crowdsale must not be paused.
     * @param _beneficiary Address performing the token purchase
     * @param _weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address _beneficiary, uint256 _weiAmount) internal view whenNotPaused {
        return super._preValidatePurchase(_beneficiary, _weiAmount);
    }
}

/**
 * Main Crowdsale basic contract
 * version 1.0
 */
contract CrowdsaleRaspberry is MintedCrowdsale, PausableCrowdsale {
    constructor (uint256 rate, address payable wallet, ERC20Chocolate token, bool _isPausable) public
    Crowdsale(rate, wallet, token) {
        // solhint-disable-previous-line no-empty-blocks
        _setPausableActive(_isPausable);
    }
}

/** WPSmartContracts.com Blockchain Made Easy http://wpsmartcontracts.com/ */ pragma solidity ^0.5.7; /** * @title SafeMath * @dev Math operations with safety checks that revert on error */ library SafeMath { int256 constant private INT256_MIN = -2**255; /** * @dev Multiplies two unsigned integers, reverts on overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b); return c; } /** * @dev Multiplies two signed integers, reverts on overflow. */ function mul(int256 a, int256 b) internal pure returns (int256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522 if (a == 0) { return 0; } require(!(a == -1 && b == INT256_MIN)); // This is the only case of overflow not detected by the check below int256 c = a * b; require(c / a == b); return c; } /** * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { // Solidity only automatically asserts when dividing by 0 require(b > 0); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Integer division of two signed integers truncating the quotient, reverts on division by zero. */ function div(int256 a, int256 b) internal pure returns (int256) { require(b != 0); // Solidity only automatically asserts when dividing by 0 require(!(b == -1 && a == INT256_MIN)); // This is the only case of overflow int256 c = a / b; return c; } /** * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend). */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { require(b <= a); uint256 c = a - b; return c; } /** * @dev Subtracts two signed integers, reverts on overflow. */ function sub(int256 a, int256 b) internal pure returns (int256) { int256 c = a - b; require((b >= 0 && c <= a) || (b < 0 && c > a)); return c; } /** * @dev Adds two unsigned integers, reverts on overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a); return c; } /** * @dev Adds two signed integers, reverts on overflow. */ function add(int256 a, int256 b) internal pure returns (int256) { int256 c = a + b; require((b >= 0 && c >= a) || (b < 0 && c < a)); return c; } /** * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo), * reverts when dividing by zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { require(b != 0); return a % b; } } /** * @title ERC20 interface * @dev see https://github.com/ethereum/EIPs/issues/20 */ interface IERC20 { function totalSupply() external view returns (uint256); function balanceOf(address who) external view returns (uint256); function allowance(address owner, address spender) external view returns (uint256); function transfer(address to, uint256 value) external returns (bool); function approve(address spender, uint256 value) external returns (bool); function transferFrom(address from, address to, uint256 value) external returns (bool); event Transfer(address indexed from, address indexed to, uint256 value); event Approval(address indexed owner, address indexed spender, uint256 value); } contract ERC20Pistachio is IERC20 { using SafeMath for uint256; mapping (address => uint256) private _balances; mapping (address => mapping (address => uint256)) private _allowed; uint256 private _totalSupply; /** * @dev Public parameters to define the token */ // Token symbol (short) string public symbol; // Token name (Long) string public name; // Decimals (18 maximum) uint8 public decimals; /** * @dev Public functions to make the contract accesible */ constructor (address initialAccount, string memory _tokenSymbol, string memory _tokenName, uint256 initialBalance) public { // Initialize Contract Parameters symbol = _tokenSymbol; name = _tokenName; decimals = 18; // default decimals is going to be 18 always _mint(initialAccount, initialBalance); } /** * @dev Total number of tokens in existence */ function totalSupply() public view returns (uint256) { return _totalSupply; } /** * @dev Gets the balance of the specified address. * @param owner The address to query the balance of. * @return An uint256 representing the amount owned by the passed address. */ function balanceOf(address owner) public view returns (uint256) { return _balances[owner]; } /** * @dev Function to check the amount of tokens that an owner allowed to a spender. * @param owner address The address which owns the funds. * @param spender address The address which will spend the funds. * @return A uint256 specifying the amount of tokens still available for the spender. */ function allowance(address owner, address spender) public view returns (uint256) { return _allowed[owner][spender]; } /** * @dev Transfer token for a specified address * @param to The address to transfer to. * @param value The amount to be transferred. */ function transfer(address to, uint256 value) public returns (bool) { _transfer(msg.sender, to, value); return true; } /** * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender. * Beware that changing an allowance with this method brings the risk that someone may use both the old * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * @param spender The address which will spend the funds. * @param value The amount of tokens to be spent. */ function approve(address spender, uint256 value) public returns (bool) { require(spender != address(0)); _allowed[msg.sender][spender] = value; emit Approval(msg.sender, spender, value); return true; } /** * @dev Transfer tokens from one address to another. * Note that while this function emits an Approval event, this is not required as per the specification, * and other compliant implementations may not emit the event. * @param from address The address which you want to send tokens from * @param to address The address which you want to transfer to * @param value uint256 the amount of tokens to be transferred */ function transferFrom(address from, address to, uint256 value) public returns (bool) { _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value); _transfer(from, to, value); emit Approval(from, msg.sender, _allowed[from][msg.sender]); return true; } /** * @dev Increase the amount of tokens that an owner allowed to a spender. * approve should be called when allowed_[_spender] == 0. To increment * allowed value is better to use this function to avoid 2 calls (and wait until * the first transaction is mined) * From MonolithDAO Token.sol * Emits an Approval event. * @param spender The address which will spend the funds. * @param addedValue The amount of tokens to increase the allowance by. */ function increaseAllowance(address spender, uint256 addedValue) public returns (bool) { require(spender != address(0)); _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue); emit Approval(msg.sender, spender, _allowed[msg.sender][spender]); return true; } /** * @dev Decrease the amount of tokens that an owner allowed to a spender. * approve should be called when allowed_[_spender] == 0. To decrement * allowed value is better to use this function to avoid 2 calls (and wait until * the first transaction is mined) * From MonolithDAO Token.sol * Emits an Approval event. * @param spender The address which will spend the funds. * @param subtractedValue The amount of tokens to decrease the allowance by. */ function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) { require(spender != address(0)); _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue); emit Approval(msg.sender, spender, _allowed[msg.sender][spender]); return true; } /** * @dev Transfer token for a specified addresses * @param from The address to transfer from. * @param to The address to transfer to. * @param value The amount to be transferred. */ function _transfer(address from, address to, uint256 value) internal { require(to != address(0)); _balances[from] = _balances[from].sub(value); _balances[to] = _balances[to].add(value); emit Transfer(from, to, value); } /** * @dev Internal function that mints an amount of the token and assigns it to * an account. This encapsulates the modification of balances such that the * proper events are emitted. * @param account The account that will receive the created tokens. * @param value The amount that will be created. */ function _mint(address account, uint256 value) internal { require(account != address(0)); _totalSupply = _totalSupply.add(value); _balances[account] = _balances[account].add(value); emit Transfer(address(0), account, value); } /** * @dev Internal function that burns an amount of the token of a given * account. * @param account The account whose tokens will be burnt. * @param value The amount that will be burnt. */ function _burn(address account, uint256 value) internal { require(account != address(0)); _totalSupply = _totalSupply.sub(value); _balances[account] = _balances[account].sub(value); emit Transfer(account, address(0), value); } /** * @dev Internal function that burns an amount of the token of a given * account, deducting from the sender's allowance for said account. Uses the * internal burn function. * Emits an Approval event (reflecting the reduced allowance). * @param account The account whose tokens will be burnt. * @param value The amount that will be burnt. */ function _burnFrom(address account, uint256 value) internal { _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value); _burn(account, value); emit Approval(account, msg.sender, _allowed[account][msg.sender]); } } /** * @title Burnable Token * @dev Token that can be irreversibly burned (destroyed). */ contract ERC20Burnable is ERC20Pistachio { bool private _burnableActive; /** * @dev Burns a specific amount of tokens. * @param value The amount of token to be burned. */ function burn(uint256 value) public whenBurnableActive { _burn(msg.sender, value); } /** * @dev Burns a specific amount of tokens from the target address and decrements allowance * @param from address The address which you want to send tokens from * @param value uint256 The amount of token to be burned */ function burnFrom(address from, uint256 value) public whenBurnableActive { _burnFrom(from, value); } /** * @dev Options to activate or deactivate Burn ability */ function _setBurnableActive(bool _active) internal { _burnableActive = _active; } modifier whenBurnableActive() { require(_burnableActive); _; } } /** * @title Roles * @dev Library for managing addresses assigned to a Role. */ library Roles { struct Role { mapping (address => bool) bearer; } /** * @dev give an account access to this role */ function add(Role storage role, address account) internal { require(account != address(0)); require(!has(role, account)); role.bearer[account] = true; } /** * @dev remove an account's access to this role */ function remove(Role storage role, address account) internal { require(account != address(0)); require(has(role, account)); role.bearer[account] = false; } /** * @dev check if an account has this role * @return bool */ function has(Role storage role, address account) internal view returns (bool) { require(account != address(0)); return role.bearer[account]; } } contract MinterRole { using Roles for Roles.Role; event MinterAdded(address indexed account); event MinterRemoved(address indexed account); Roles.Role private _minters; constructor () internal { _addMinter(msg.sender); } modifier onlyMinter() { require(isMinter(msg.sender)); _; } function isMinter(address account) public view returns (bool) { return _minters.has(account); } function addMinter(address account) public onlyMinter { _addMinter(account); } function renounceMinter() public { _removeMinter(msg.sender); } function _addMinter(address account) internal { _minters.add(account); emit MinterAdded(account); } function _removeMinter(address account) internal { _minters.remove(account); emit MinterRemoved(account); } } /** * @title ERC20Mintable * @dev ERC20 minting logic */ contract ERC20Mintable is ERC20Pistachio, MinterRole { bool private _mintableActive; /** * @dev Function to mint tokens * @param to The address that will receive the minted tokens. * @param value The amount of tokens to mint. * @return A boolean that indicates if the operation was successful. */ function mint(address to, uint256 value) public onlyMinter whenMintableActive returns (bool) { _mint(to, value); return true; } /** * @dev Options to activate or deactivate Burn ability */ function _setMintableActive(bool _active) internal { _mintableActive = _active; } modifier whenMintableActive() { require(_mintableActive); _; } } contract PauserRole { using Roles for Roles.Role; event PauserAdded(address indexed account); event PauserRemoved(address indexed account); Roles.Role private _pausers; constructor () internal { _addPauser(msg.sender); } modifier onlyPauser() { require(isPauser(msg.sender)); _; } function isPauser(address account) public view returns (bool) { return _pausers.has(account); } function addPauser(address account) public onlyPauser { _addPauser(account); } function renouncePauser() public { _removePauser(msg.sender); } function _addPauser(address account) internal { _pausers.add(account); emit PauserAdded(account); } function _removePauser(address account) internal { _pausers.remove(account); emit PauserRemoved(account); } } /** * @title Pausable * @dev Base contract which allows children to implement an emergency stop mechanism. */ contract Pausable is PauserRole { event Paused(address account); event Unpaused(address account); bool private _pausableActive; bool private _paused; constructor () internal { _paused = false; } /** * @return true if the contract is paused, false otherwise. */ function paused() public view returns (bool) { return _paused; } /** * @dev Modifier to make a function callable only when the contract is not paused. */ modifier whenNotPaused() { require(!_paused); _; } /** * @dev Modifier to make a function callable only when the contract is paused. */ modifier whenPaused() { require(_paused); _; } /** * @dev called by the owner to pause, triggers stopped state */ function pause() public onlyPauser whenNotPaused whenPausableActive { _paused = true; emit Paused(msg.sender); } /** * @dev called by the owner to unpause, returns to normal state */ function unpause() public onlyPauser whenPaused whenPausableActive { _paused = false; emit Unpaused(msg.sender); } /** * @dev Options to activate or deactivate Pausable ability */ function _setPausableActive(bool _active) internal { _pausableActive = _active; } modifier whenPausableActive() { require(_pausableActive); _; } } /** * @title Advanced ERC20 token * * @dev Implementation of the basic standard token plus mint and burn public functions. * * Version 2. This version delegates the minter and pauser renounce to parent-factory contract * that allows ICOs to be minter for token selling * */ contract ERC20Chocolate is ERC20Pistachio, ERC20Burnable, ERC20Mintable, Pausable { // maximum capital, if defined > 0 uint256 private _cap; constructor ( address initialAccount, string memory _tokenSymbol, string memory _tokenName, uint256 initialBalance, uint256 cap, bool _burnableOption, bool _mintableOption, bool _pausableOption ) public ERC20Pistachio(initialAccount, _tokenSymbol, _tokenName, initialBalance) { // we must add customer account as the first minter addMinter(initialAccount); // add customer as pauser addPauser(initialAccount); if (cap > 0) { _cap = cap; // maximum capitalization limited } else { _cap = 0; // unlimited capitalization } // activate or deactivate options _setBurnableActive(_burnableOption); _setMintableActive(_mintableOption); _setPausableActive(_pausableOption); } /** * @return the cap for the token minting. */ function cap() public view returns (uint256) { return _cap; } /** * limit the mint to a maximum cap only if cap is defined */ function _mint(address account, uint256 value) internal { if (_cap > 0) { require(totalSupply().add(value) <= _cap); } super._mint(account, value); } /** * Pausable options */ function transfer(address to, uint256 value) public whenNotPaused returns (bool) { return super.transfer(to, value); } function transferFrom(address from,address to, uint256 value) public whenNotPaused returns (bool) { return super.transferFrom(from, to, value); } function approve(address spender, uint256 value) public whenNotPaused returns (bool) { return super.approve(spender, value); } function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) { return super.increaseAllowance(spender, addedValue); } function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) { return super.decreaseAllowance(spender, subtractedValue); } } /** * @dev Contract module that helps prevent reentrant calls to a function. * * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier * available, which can be aplied to functions to make sure there are no nested * (reentrant) calls to them. * * Note that because there is a single `nonReentrant` guard, functions marked as * `nonReentrant` may not call one another. This can be worked around by making * those functions `private`, and then adding `external` `nonReentrant` entry * points to them. */ contract ReentrancyGuard { // counter to allow mutex lock with only one SSTORE operation uint256 private _guardCounter; constructor () internal { // The counter starts at one to prevent changing it from zero to a non-zero // value, which is a more expensive operation. _guardCounter = 1; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and make it call a * `private` function that does the actual work. */ modifier nonReentrant() { _guardCounter += 1; uint256 localCounter = _guardCounter; _; require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call"); } } /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using SafeMath for uint256; using Address for address; function safeTransfer(IERC20 token, address to, uint256 value) internal { callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } function safeApprove(IERC20 token, address spender, uint256 value) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' // solhint-disable-next-line max-line-length require((value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 newAllowance = token.allowance(address(this), spender).add(value); callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 newAllowance = token.allowance(address(this), spender).sub(value); callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. // A Solidity high level call has three parts: // 1. The target address is checked to verify it contains contract code // 2. The call itself is made, and success asserted // 3. The return value is decoded, which in turn checks the size of the returned data. // solhint-disable-next-line max-line-length require(address(token).isContract(), "SafeERC20: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = address(token).call(data); require(success, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional // solhint-disable-next-line max-line-length require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } } /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * This test is non-exhaustive, and there may be false-negatives: during the * execution of a contract's constructor, its address will be reported as * not containing a contract. * * IMPORTANT: It is unsafe to assume that an address for which this * function returns false is an externally-owned account (EOA) and not a * contract. */ function isContract(address account) internal view returns (bool) { // This method relies in extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. // According to EIP-1052, 0x0 is the value returned for not-yet created accounts // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned // for accounts without code, i.e. `keccak256('')` bytes32 codehash; bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470; // solhint-disable-next-line no-inline-assembly assembly { codehash := extcodehash(account) } return (codehash != 0x0 && codehash != accountHash); } /** * @dev Converts an `address` into `address payable`. Note that this is * simply a type cast: the actual underlying value is not changed. */ function toPayable(address account) internal pure returns (address payable) { return address(uint160(account)); } } /** * @title Crowdsale * @dev Crowdsale is a base contract for managing a token crowdsale, * allowing investors to purchase tokens with ether. This contract implements * such functionality in its most fundamental form and can be extended to provide additional * functionality and/or custom behavior. * The external interface represents the basic interface for purchasing tokens, and conforms * the base architecture for crowdsales. It is *not* intended to be modified / overridden. * The internal interface conforms the extensible and modifiable surface of crowdsales. Override * the methods to add functionality. Consider using 'super' where appropriate to concatenate * behavior. */ contract Crowdsale is ReentrancyGuard { using SafeMath for uint256; using SafeERC20 for ERC20Chocolate; // The token being sold ERC20Chocolate private _token; // Address where funds are collected address payable private _wallet; // How many token units a buyer gets per wei. // The rate is the conversion between wei and the smallest and indivisible token unit. // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK // 1 wei will give you 1 unit, or 0.001 TOK. uint256 private _rate; // Amount of wei raised uint256 private _weiRaised; /** * Event for token purchase logging * @param purchaser who paid for the tokens * @param beneficiary who got the tokens * @param value weis paid for purchase * @param amount amount of tokens purchased */ event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount); /** * @param rate Number of token units a buyer gets per wei * @dev The rate is the conversion between wei and the smallest and indivisible * token unit. So, if you are using a rate of 1 with a ERC20Detailed token * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK. * @param wallet Address where collected funds will be forwarded to * @param token Address of the token being sold */ constructor (uint256 rate, address payable wallet, ERC20Chocolate token) public { require(rate > 0, "Crowdsale: rate is 0"); require(wallet != address(0), "Crowdsale: wallet is the zero address"); require(address(token) != address(0), "Crowdsale: token is the zero address"); _rate = rate; _wallet = wallet; _token = token; } /** * @dev fallback function ***DO NOT OVERRIDE*** * Note that other contracts will transfer funds with a base gas stipend * of 2300, which is not enough to call buyTokens. Consider calling * buyTokens directly when purchasing tokens from a contract. */ function () external payable { buyTokens(msg.sender); } /** * @return the token being sold. */ function token() public view returns (IERC20) { return _token; } /** * @return the address where funds are collected. */ function wallet() public view returns (address payable) { return _wallet; } /** * @return the number of token units a buyer gets per wei. */ function rate() public view returns (uint256) { return _rate; } /** * @return the amount of wei raised. */ function weiRaised() public view returns (uint256) { return _weiRaised; } /** * @dev low level token purchase ***DO NOT OVERRIDE*** * This function has a non-reentrancy guard, so it shouldn't be called by * another `nonReentrant` function. * @param beneficiary Recipient of the token purchase */ function buyTokens(address beneficiary) public nonReentrant payable { uint256 weiAmount = msg.value; _preValidatePurchase(beneficiary, weiAmount); // calculate token amount to be created uint256 tokens = _getTokenAmount(weiAmount); // update state _weiRaised = _weiRaised.add(weiAmount); _processPurchase(beneficiary, tokens); emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens); _updatePurchasingState(beneficiary, weiAmount); _forwardFunds(); _postValidatePurchase(beneficiary, weiAmount); } /** * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met. * Use `super` in contracts that inherit from Crowdsale to extend their validations. * Example from CappedCrowdsale.sol's _preValidatePurchase method: * super._preValidatePurchase(beneficiary, weiAmount); * require(weiRaised().add(weiAmount) <= cap); * @param beneficiary Address performing the token purchase * @param weiAmount Value in wei involved in the purchase */ function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view { require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address"); require(weiAmount != 0, "Crowdsale: weiAmount is 0"); } /** * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid * conditions are not met. * @param beneficiary Address performing the token purchase * @param weiAmount Value in wei involved in the purchase */ function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view { // solhint-disable-previous-line no-empty-blocks } /** * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends * its tokens. * @param beneficiary Address performing the token purchase * @param tokenAmount Number of tokens to be emitted */ function _deliverTokens(address beneficiary, uint256 tokenAmount) internal { _token.safeTransfer(beneficiary, tokenAmount); } /** * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send * tokens. * @param beneficiary Address receiving the tokens * @param tokenAmount Number of tokens to be purchased */ function _processPurchase(address beneficiary, uint256 tokenAmount) internal { _deliverTokens(beneficiary, tokenAmount); } /** * @dev Override for extensions that require an internal state to check for validity (current user contributions, * etc.) * @param beneficiary Address receiving the tokens * @param weiAmount Value in wei involved in the purchase */ function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal { // solhint-disable-previous-line no-empty-blocks } /** * @dev Override to extend the way in which ether is converted to tokens. * @param weiAmount Value in wei to be converted into tokens * @return Number of tokens that can be purchased with the specified _weiAmount */ function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) { return weiAmount.mul(_rate); } /** * @dev Determines how ETH is stored/forwarded on purchases. */ function _forwardFunds() internal { _wallet.transfer(msg.value); } } /** * @title MintedCrowdsale * @dev Extension of Crowdsale contract whose tokens are minted in each purchase. * Token ownership should be transferred to MintedCrowdsale for minting. */ contract MintedCrowdsale is Crowdsale { /** * @dev Overrides delivery by minting tokens upon purchase. * @param beneficiary Token purchaser * @param tokenAmount Number of tokens to be minted */ function _deliverTokens(address beneficiary, uint256 tokenAmount) internal { // Potentially dangerous assumption about the type of the token. require( ERC20Mintable(address(token())).mint(beneficiary, tokenAmount), "MintedCrowdsale: minting failed" ); } } /** * @title PausableCrowdsale * @dev Extension of Crowdsale contract where purchases can be paused and unpaused by the pauser role. */ contract PausableCrowdsale is Crowdsale, Pausable { /** * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met. * Use super to concatenate validations. * Adds the validation that the crowdsale must not be paused. * @param _beneficiary Address performing the token purchase * @param _weiAmount Value in wei involved in the purchase */ function _preValidatePurchase(address _beneficiary, uint256 _weiAmount) internal view whenNotPaused { return super._preValidatePurchase(_beneficiary, _weiAmount); } } /** * Main Crowdsale basic contract * version 1.0 */ contract CrowdsaleRaspberry is MintedCrowdsale, PausableCrowdsale { constructor (uint256 rate, address payable wallet, ERC20Chocolate token, bool _isPausable) public Crowdsale(rate, wallet, token) { // solhint-disable-previous-line no-empty-blocks _setPausableActive(_isPausable); } }

[
    {
        "constant": false,
        "inputs": [
            {
                "name": "account",
                "type": "address"
            }
        ],
        "name": "addPauser",
        "outputs": [],
        "payable": false,
        "stateMutability": "nonpayable",
        "type": "function"
    },
    {
        "constant": false,
        "inputs": [
            {
                "name": "beneficiary",
                "type": "address"
            }
        ],
        "name": "buyTokens",
        "outputs": [],
        "payable": true,
        "stateMutability": "payable",
        "type": "function"
    },
    {
        "constant": false,
        "inputs": [],
        "name": "pause",
        "outputs": [],
        "payable": false,
        "stateMutability": "nonpayable",
        "type": "function"
    },
    {
        "constant": false,
        "inputs": [],
        "name": "renouncePauser",
        "outputs": [],
        "payable": false,
        "stateMutability": "nonpayable",
        "type": "function"
    },
    {
        "constant": false,
        "inputs": [],
        "name": "unpause",
        "outputs": [],
        "payable": false,
        "stateMutability": "nonpayable",
        "type": "function"
    },
    {
        "inputs": [
            {
                "name": "rate",
                "type": "uint256"
            },
            {
                "name": "wallet",
                "type": "address"
            },
            {
                "name": "token",
                "type": "address"
            },
            {
                "name": "_isPausable",
                "type": "bool"
            }
        ],
        "payable": false,
        "stateMutability": "nonpayable",
        "type": "constructor"
    },
    {
        "payable": true,
        "stateMutability": "payable",
        "type": "fallback"
    },
    {
        "anonymous": false,
        "inputs": [
            {
                "indexed": false,
                "name": "account",
                "type": "address"
            }
        ],
        "name": "Paused",
        "type": "event"
    },
    {
        "anonymous": false,
        "inputs": [
            {
                "indexed": false,
                "name": "account",
                "type": "address"
            }
        ],
        "name": "Unpaused",
        "type": "event"
    },
    {
        "anonymous": false,
        "inputs": [
            {
                "indexed": true,
                "name": "account",
                "type": "address"
            }
        ],
        "name": "PauserAdded",
        "type": "event"
    },
    {
        "anonymous": false,
        "inputs": [
            {
                "indexed": true,
                "name": "account",
                "type": "address"
            }
        ],
        "name": "PauserRemoved",
        "type": "event"
    },
    {
        "anonymous": false,
        "inputs": [
            {
                "indexed": true,
                "name": "purchaser",
                "type": "address"
            },
            {
                "indexed": true,
                "name": "beneficiary",
                "type": "address"
            },
            {
                "indexed": false,
                "name": "value",
                "type": "uint256"
            },
            {
                "indexed": false,
                "name": "amount",
                "type": "uint256"
            }
        ],
        "name": "TokensPurchased",
        "type": "event"
    },
    {
        "constant": true,
        "inputs": [
            {
                "name": "account",
                "type": "address"
            }
        ],
        "name": "isPauser",
        "outputs": [
            {
                "name": "",
                "type": "bool"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "paused",
        "outputs": [
            {
                "name": "",
                "type": "bool"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "rate",
        "outputs": [
            {
                "name": "",
                "type": "uint256"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "token",
        "outputs": [
            {
                "name": "",
                "type": "address"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "wallet",
        "outputs": [
            {
                "name": "",
                "type": "address"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    },
    {
        "constant": true,
        "inputs": [],
        "name": "weiRaised",
        "outputs": [
            {
                "name": "",
                "type": "uint256"
            }
        ],
        "payable": false,
        "stateMutability": "view",
        "type": "function"
    }
]

[ { "constant": false, "inputs": [ { "name": "account", "type": "address" } ], "name": "addPauser", "outputs": [], "payable": false, "stateMutability": "nonpayable", "type": "function" }, { "constant": false, "inputs": [ { "name": "beneficiary", "type": "address" } ], "name": "buyTokens", "outputs": [], "payable": true, "stateMutability": "payable", "type": "function" }, { "constant": false, "inputs": [], "name": "pause", "outputs": [], "payable": false, "stateMutability": "nonpayable", "type": "function" }, { "constant": false, "inputs": [], "name": "renouncePauser", "outputs": [], "payable": false, "stateMutability": "nonpayable", "type": "function" }, { "constant": false, "inputs": [], "name": "unpause", "outputs": [], "payable": false, "stateMutability": "nonpayable", "type": "function" }, { "inputs": [ { "name": "rate", "type": "uint256" }, { "name": "wallet", "type": "address" }, { "name": "token", "type": "address" }, { "name": "_isPausable", "type": "bool" } ], "payable": false, "stateMutability": "nonpayable", "type": "constructor" }, { "payable": true, "stateMutability": "payable", "type": "fallback" }, { "anonymous": false, "inputs": [ { "indexed": false, "name": "account", "type": "address" } ], "name": "Paused", "type": "event" }, { "anonymous": false, "inputs": [ { "indexed": false, "name": "account", "type": "address" } ], "name": "Unpaused", "type": "event" }, { "anonymous": false, "inputs": [ { "indexed": true, "name": "account", "type": "address" } ], "name": "PauserAdded", "type": "event" }, { "anonymous": false, "inputs": [ { "indexed": true, "name": "account", "type": "address" } ], "name": "PauserRemoved", "type": "event" }, { "anonymous": false, "inputs": [ { "indexed": true, "name": "purchaser", "type": "address" }, { "indexed": true, "name": "beneficiary", "type": "address" }, { "indexed": false, "name": "value", "type": "uint256" }, { "indexed": false, "name": "amount", "type": "uint256" } ], "name": "TokensPurchased", "type": "event" }, { "constant": true, "inputs": [ { "name": "account", "type": "address" } ], "name": "isPauser", "outputs": [ { "name": "", "type": "bool" } ], "payable": false, "stateMutability": "view", "type": "function" }, { "constant": true, "inputs": [], "name": "paused", "outputs": [ { "name": "", "type": "bool" } ], "payable": false, "stateMutability": "view", "type": "function" }, { "constant": true, "inputs": [], "name": "rate", "outputs": [ { "name": "", "type": "uint256" } ], "payable": false, "stateMutability": "view", "type": "function" }, { "constant": true, "inputs": [], "name": "token", "outputs": [ { "name": "", "type": "address" } ], "payable": false, "stateMutability": "view", "type": "function" }, { "constant": true, "inputs": [], "name": "wallet", "outputs": [ { "name": "", "type": "address" } ], "payable": false, "stateMutability": "view", "type": "function" }, { "constant": true, "inputs": [], "name": "weiRaised", "outputs": [ { "name": "", "type": "uint256" } ], "payable": false, "stateMutability": "view", "type": "function" } ]